A wire straightening and cutting machine is a machine that straightens steel bars and cuts them into fixed lengths.
Simply:
Bent steel → straight → same length cutting.
It is widely used in small workshops and construction sites.
Many new users told me one thing: “We used to cut by hand. It was too slow.”
Now the machine solves this problem.
Wire Straightening and Cutting Machine Parameter
| Performance of straightening machine | YG-3-10 | YG-4-10 | YG-5-12 | YG-8-14 | YG-10-16 | YG10-16 | |
| Straightening the diameter of reinforcing bars | Cold-rolled plain round/cold-rolled ribbed steel bars CRB550 | 3-10MM | 4-10MM | 5-12MM | 6-12MM | 8-14MM | 10-16MM |
| High-ductility cold-rolled ribbed steel bars CRB600H | 3-9MM | 4-9MM | 5-11MM | 6-12MM | 8-14MM | 10-16MM | |
| Hot-rolled plain round steel bars HPB235/300 | 5-10MM | 5-10MM | 6-12MM | 6-12MM | 8-14MM | 10-16MM | |
| Hot-rolled ribbed steel bars HRB335400 | 5-8MM | 5-8MM | 6-10MM | 6-12MM | 8-14MM | 10-16MM | |
| Straightening length | 0.6-12m Can be lengthened or shortened | ||||||
| Straightening speed (variable speed, three speed settings) | 70-100-130m/min | ||||||
| Straightness of the straightened rebar | Within less 2mm | ||||||
| Accuracy of the straightened length | within less or more 1mm | ||||||
| Motor power (Servo-controlled shearing) | kw | 18.5+7.5 | 30+7.5 | 37+7.5 | 37+7.5 | 37+7.5 | 45+7.5 |
Where Is a Wire Straightening and Cutting Machine Used?
It is mainly used in construction and small steel workshops.
Common places:
- Small construction sites
- Precast factories
- Bridge foundation work
- Local rebar shops
Some users first use a rebar straightener for simple work. But when volume grows, they need full cutting automation. Steel bar straightening machine is often mentioned for similar use.
How Does a Rebar Straightening Machine Work?
It straightens steel using rollers and cuts automatically by length control.
Basic steps:
Feeding → Straightening → Measuring → Cutting → Output
YG machinery uses PLC control. Operation is very simple.
Many users of rebar straightening machine are surprised: “It works faster than expected.”
How to Choose a Wire Straightening and Cutting Machine?
Beginners only need to check 3 things.
- Stable running
- Cutting accuracy (±1mm recommended)
- Easy operation
Model selection is not the most important thing. From experience, maintenance is often ignored. A complex rebar straightening machine is hard to manage later.
Basic Applications of Wire Straightening and Cutting Machine
It is used for basic steel processing tasks.
Applications:
- House construction
- Small precast plants
- Rural building projects
- Small contractors
Rebar straightening machine reduces labor cost. Many users see clear improvement after switching from manual work.
Beginner Case Study (Philippines)
A Philippines user improved efficiency by about 40%.
Before: manual cutting, low output.
After using YG machine:
- Workers reduced from 2 to 1
- Faster and stable cutting
- Lower error rate
He said: “The machine makes work easier.”
They also used a rebar straightener before cutting.
A wire straightening and cutting machine is the first step into automation.
It is simple. But very useful. For beginners, choosing the right machine is more important than technical details.